Elastic one-return boundary element method and hybrid elastic thin-slab propagator for strong-contrast media with sharp boundaries          下载免费PDF全文

Zengxi Ge  Yi Luo  Yuyan Ma  Rushan Wu 《地震科学（英文版）》2018,31(2):92-99

In this paper, we developed the theory and algorithm of an elastic one-way boundary element method(BEM) and a corresponding hybrid elastic thin-slab propagator for earth media with sharp boundaries between strong contrast media. This approach can takes the advantage of accurate boundary condition of BEM and completely overcomes the weak contrast limitation of the perturbationtheory based one-way operator approach. The one-way BEM is a smooth boundary approximation, which avoids huge matrix operations in exact full BEM. In addition, the one-way BEM can model the primary-only transmitted and reflected waves and therefore is a valuable tool in elastic imaging and inversion. Through numerical tests for some simple models,we proved the validity and efficiency of the proposed method.  相似文献   

基于背景噪声研究青藏高原东北缘瑞利波相速度和方位各向异性   总被引：2，自引：1，他引：1       下载免费PDF全文

王琼  高原 《地球物理学报》2018,61(7):2760-2775

本研究收集了甘肃、青海、宁夏等118个宽频带数字地震台站的连续波形资料，利用噪声互相关，经过计算和筛选，在5~38 s范围内，共得到5773条瑞利波相速度频散曲线.然后采用1°×1°的网格划分，反演获得青藏高原东北缘相速度和方位各向异性分布.结果表明：短周期8~12 s内，鄂尔多斯从低速异常变为高速异常；该周期范围内各向异性结果与区域断裂走向有很好的一致性.18~25 s周期内，祁连地块、松潘-甘孜地块、羌塘地块低速异常范围逐渐变大，随周期增加地壳低速异常与人工探测结果相符；鄂尔多斯表现为速度随周期增加逐渐变大，说明其中下地壳速度相对偏高，不存在低速异常；该周期范围内的各向异性特征表现为，祁连地块和松潘甘孜地块大致呈NW-SE方向，而青藏高原内部快波方向显示了顺时针旋转的形态.在30~35 s范围内面波速度主要受莫霍面深度和莫霍面附近介质速度的影响，与地壳厚度分布有非常好的吻合.综合不同方法获得的各向异性研究结果，支持印度-欧亚板块的碰撞使青藏高原东北缘地壳发生缩短和逐渐隆升的观点，认为整个岩石圈的垂直缩短变形是青藏高原东北缘的主要形成机制.  相似文献   

Study on the Moment Magnitude of Small and Moderate Earthquakes Located in the Inner Mongolia Region     

Liu Fang  Zhang Fan  Li Bin  Na Re 《中国地震研究》2018,32(1):53-63

Based on digital seismic waveform data from Inner Mongolia Digital Seismic Network, the source spectrum parameters of 182 small and moderate earthquakes from January, 2009 to September, 2016 are derived, and the seismic moment M₀ and moment magnitude M_W of the earthquakes are calculated. The M_L-M_W relationship and the relationship between stress drop and magnitude are obtained using the linear regression method. It is clear that incorporating the moment magnitude into the seismic quick report catalog and the official earthquake catalog can enrich earthquake observation report content, thus providing better service for earthquake emergency and earthquake scientific research.  相似文献   

Using the applied element method for modelling calcium silicate brick masonry subjected to in‐plane cyclic loading     

Daniele Malomo  Rui Pinho  Andrea Penna 《地震工程与结构动力学》2018,47(7):1610-1630

The response of calcium silicate unreinforced masonry construction to horizontal cyclic loading has recently become the focus of experimental and numerical research, given its extensive use in some areas of the world that are now exposed to induced earthquakes (eg, north of the Netherlands). To assess the seismic behaviour of such construction, a relatively wide range of modelling methodologies are available, amongst which the discrete elements approach, which takes into account the intrinsic heterogeneity of a brick‐mortar assembly, can probably be deemed as the most appropriate computational procedure. On the other hand, however, since discrete elements numerical methods are based on a discontinuum domain, often they are not able to model every stage of the structural response adequately, and because of the high computational burden required, the analysis scale should be chosen carefully. The applied element method is a relatively recent addition to the discrete elements family, with a high potential for overcoming the aforementioned limitations or difficulties. Initially conceived to model blast events and concrete structures, its use in the earthquake engineering field is, of late, increasing noticeably. In this paper, the use of the applied element method to model the in‐plane cyclic response of calcium silicate masonry walls is discussed and scrutinised, also through the comparison with experimental results of in‐plane cyclic shear‐compression tests on unreinforced masonry walls.  相似文献   

SIMULATION STUDY OF ROAD-CUT EFFECTS ON SLOPE STABILITY     

CHEN Xiao-li  WANG Ming-ming  ZHANG Ling 《地震地质》2018,40(6):1390-1401

Landslides and rock falls along the highway are common geological hazards in Southwest China. As an influencing factor on potential landslides behavior, roads or distance to roads have been successfully used in landslide susceptibility assessments in mountainous area. However, the relationship between the road-cut and the slope stability is not clear. Therefore, we performed two-dimensional slope stability calculation using the general limit equilibrium (GLE)method incorporated in the software SLOPE/W of GeoStudio for stability analysis of slopes. Our studies show that the man-made roads influence on the slope stability mainly exists in two ways:One is to create a new steep slope, which will result in rock falls and shallow landslides along the roads; the other is to influence the stability of the original slope, which will result in comparatively huge landslides. For the latter, our simulation study reveals that the road location, namely at which part of a natural slope to construct a road is important for the slope stability. For a natural slope with a potential slip surface, if a road is constructed at or near the slope toe where the potential slip surface surpasses, it will greatly degrade the slope's factor of safety (Fs) and make the slope unstable; however, if a rode-cut is near the top of the slope, it will increase the slope's Fs and make the slope more stable. The safety location is different for different slope angle, steeper slope needs a higher location for a safety road-cut in comparison with gentle slopes. Moreover, the slope stability decreases when loading a seismic force and it varies with the slope angle. Firstly, the Fs decreases when the slope angle increasing, and when the slope angle reaches 45°, the Fs then becomes greater with the slope angle increasing.  相似文献   

Precise Location of Earthquakes at the Eastern Boundaries of the Sichuan-Yunnan Rhombic Block     

Fu Ying  Hu Bin  Long Feng  Wang Shiyuan 《中国地震研究》2018,32(4):470-481

Based on the seismic station data sets from Sichuan and Yunnan provinces, we employed a multi-step seismic location method (Hypo2000 + Velest + HypoDD) to precisely locate the 7,787 earthquakes that occurred during 2010-2015 along the eastern boundaries of the Sichuan-Yunnan rhombic block, namely from southern Dawu to the Qiaojia segment. The final results show that location precision is greatly advanced and epicenter distribution exhibits good consistency with the linear distribution of the seismic faults. Earthquake distribution is quite intensive at the intersection region in the southern segment of the Xianshuihe fault, the Anninghe fault zone, the Xiaojinhe fault zone and the Daliangshan fault zone to the east. The depth profile of seismicity shows a clear stepwise activity along the active seismic fault zones. The profile crossing the faults of the Xianshuihe, Anninghe, and Daliangshan presents a complex interaction among faults near the multiple faults intersection region, Shimian, where the earthquakes are obviously divided into two groups in depth. Earthquakes are very rare at the depth of 15km-20km, which is consistent with the region of the plastic rheology between 14km-19km calculated by Zhu Ailan et al.,(2005).  相似文献   

2017年四川九寨沟7.0级地震前地震应变场分析   总被引：2，自引：1，他引：1       下载免费PDF全文

罗国富  刘忠旺  丁凤和  马禾青  杨明芝 《地震工程学报》2018,40(6):1322-1330

以地震应变场作为地震活动的变量，通过自然正交函数展开方法，计算2017年8月8日四川九寨沟7.0级地震前的地震应变场，提取出震前时间因子的异常变化。计算结果发现应变场前4个时间因子在震前1~3年的中短期异常并不显著，只有第2个和第4个时间因子震前有小幅度的异常变化，分析其原因，时间因子可能受到2008年汶川8.0级地震和2013年岷县漳县6.6级地震前大幅度异常的影响。与时间因子对应的空间等值线形成局部应变高值异常危险区，可能是2013年岷县漳县6.6级地震和2017年九寨沟7.0级地震空间异常的中短期特征。再对比九寨沟7.0级地震前后与松潘-平武7.2级双震的空间异常随时间演变，分析异常发展变化模式的差异，最后应用地震资料的累积频次从物理角度解释异常形成的机制。  相似文献   

“房桥合一”铁路客站抗震计算的快速高效多维虚拟激励法          下载免费PDF全文

徐汉勇  余志武 《地震工程学报》2018,40(3):438-443

针对"房桥合一"铁路客站节点数多、空间相互作用显著等特点,利用沿结构整体坐标系方向功率谱的表达式和合理谱强度因子的确定方法,提出能合理考虑地震激励输入角度变化的快速多维虚拟激励法,并以天津西站Ⅱ区作为工程案例,对利用快速多维虚拟激励法、时程响应分析法和已有虚拟激励法的计算结果进行比较。结果表明:三种算法的计算结果吻合较好,证明快速多维虚拟激励法的计算值是合理的;且与已有虚拟激励法相比、快速多维虚拟激励法的计算效率显著提高,更适合于"房桥合一"铁路客站的抗震计算。  相似文献   

基于不同地面特性的混凝土框架结构的抗震性能评估          下载免费PDF全文

张丹丽  谢强 《地震工程学报》2018,40(6):1259-1265

基于3层普通抗震混凝土框架结构,采用能力谱法评估了矩形框架结构的抗震性能,从实验结果中获取能力曲线,并利用在地面特性条件下的各站记录的地震地面运动建立需求曲线。评估结果表明,3层混凝土框架可以抵抗地面条件为1和2的所有地震带A,B,C,D和E的地震荷载;对于地面条件3,混凝土框架在地震带A,B,C和D中的实验结果令人满意;对于地面条件4,混凝土框架只对地震带A和B有效。  相似文献   

高精度直升机机载LiDAR在高速公路改扩建勘测中的应用可行性研究          下载免费PDF全文

郑伟安 《山东国土资源》2018,34(8)

机载LiDAR在公路勘测方面的用途日益广泛。该文对直升机机载LiDAR在高速公路改扩建中的应用技术路线可行性进行了研究论证,从地面控制测量、点云数据获取、点云数据处理、成果应用等多个方面进行了阐述,通过分析LiDAR点云数据在5种不同地面控制点布设方案校正下的点云数据精度,论证了利用地面控制点对直升机机载LiDAR点云数据进行平面和高程校正的可行性。  相似文献